This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones.
To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder. Need a more secure mounting? Place the clamp blocks over the 3.25" (83 mm) diameter 0.75" (19 mm) thick booster mounting ring and gently tighten the cap screws.
Not using a booster? Flip the holder over and use the other side, which is a better fit for converters with diameters between 2.65" (67 mm) and 2.99" (76 mm) which includes almost all 20KHz converters of at least 500 watt power capability.
If you are using a booster in the stack, you should probably consider using two of these holders, one for the booster and one for the converter/transducer. It is possible that the reactor vessel you are using would be a good fit in this holder as well.
Not using a booster? Consider obtaining just the holder without the clamp blocks, our model number RS200.
Made in USA of aircraft grade aluminum anodized and nickel sealed, includes nickel-plated steel thumbscrew, chemically blackened steel cap screws and plated steel washers.